Contact Sales

Prepare the door and wires prior to Latch device installation

Latch M, C & C2: 

New construction:

If possible it is recommended that the doors are prepared by the door manufacturer using the appropriate cutsheets for Latch M, Latch C, and Latch C2.

Retrofit:

Cutsheets are provided with each Latch M & C device. 



Latch R: 

Use one of the diagrams below to prepare the wiring for your latch R.

Wiring Requirements

Standalone

Note: This guide is only an overview of the wiring requirements. For termination, refer to the Latch R installation guide.

Screen_Shot_2020-10-19_at_1.32.15_PM.png

Door Monitoring (Available 2019)

Note: This guide is only an overview of the wiring requirements. For termination, refer to the Latch R installation guide.


 

Wiegand

Note: This guide is only an overview of the wiring requirements. For termination refer to the Latch R installation guide.




 

Elevator control

Note: This guide is only an overview of the wiring requirements for termination refer the the Latch R installation guide.



To hardwire the Latch M, check the Installation Guide