Latch M, C & C2:
New construction:
If possible it is recommended that the doors are prepared by the door manufacturer using the appropriate cutsheets for Latch M, Latch C, and Latch C2.
Retrofit:
Cutsheets are provided with each Latch M & C device.
Latch R:
Use one of the diagrams below to prepare the wiring for your latch R.
Wiring Requirements
Standalone
Note: This guide is only an overview of the wiring requirements. For termination, refer to the Latch R installation guide.
Door Monitoring (Available 2019)
Note: This guide is only an overview of the wiring requirements. For termination, refer to the Latch R installation guide.
Wiegand
Note: This guide is only an overview of the wiring requirements. For termination refer to the Latch R installation guide.
Elevator control
Note: This guide is only an overview of the wiring requirements for termination refer the the Latch R installation guide.
To hardwire the Latch M, check the Installation Guide.