Contact Sales

Activating and adding a Latch Camera

Once a Latch Camera has been installed please follow these steps:

  1. Open the Latch Manager App and select the desired property
  2. Ensure the 'Doors' tab is selected and tap the desired "Intercom Door"
  3. Select 'Pair Camera'
  4. Enter the Camera Mac to pair it to the relevant Door and Intercom
  5. Tap on 'Continue'

Prepare your property to activate the Camera with an Intercom Door.

Creating a new Door:

Login to the Latch Mission Control and create a new Door by following these steps:

  1. Go to Access, then select 'Doors', and click on 'Add Door'
  2. Name the door. This name will be displayed in the Door App, so be sure to give your door a clear label (e.g., Pool, Gym, Front Entrance, 202, Unit 202, Garage)
  3. Select the Door type 'Building Entrance'
  4. Ensure the 'Intercom' is selected in the Intercom dropdown menu
  5. Activate the lock in the new door created

Editing an existing Door:

  1. Go to Access, then select 'Doors', and click an existing Door with the door type 'Building Entrance'
  2. Ensure the 'Intercom' is selected in the Intercom dropdown menu

 

 

Was this article helpful?